Study on the Axial Compressive Behavior of Steel Fiber Reinforced Concrete Confined with High-Strength Rectangular Spiral Stirrup

Monotonic axial compression tests were carried out on 16 steel fiber-reinforced concrete (SFRC) columns confined by rectangular spiral stirrups. The impacts of stirrup spacing, stirrup strength, concrete strength, and cross-sectional aspect ratio on the peak load, ductility, and failure mode of these columns were analyzed. The test results demonstrate that steel fibers significantly mitigate the spalling of the concrete column’s protective layer through their bridging effect. Small spacing and high-strength spiral stirrups effectively confine the core concrete, enhancing the bearing capacity and ductility of concrete columns. Concrete strength exhibits a positive correlation with the confinement effect. However, as concrete strength increases, the rate of improvement in the confinement effect decreases. At peak compressive stress, the high-strength stirrup may not reach its yield state. Based on the test results, a method for calculating stirrup stress under the peak stress of confined concrete is proposed. A “coupling restraint coefficient” is proposed, and a constitutive model for HRSS confined steel fiber reinforced concrete is developed, considering the coupled effect of effective confinement forces in different directions. Comparative analysis shows that the constitutive model established in this paper agrees well with the experimental results and demonstrates good applicability.