Reverse engineering the Ozurdex dexamethasone intravitreal implant

Ozurdex is a biodegradable implant formulated for sustained-release delivery of the corticosteroid dexamethasone to the posterior segment of the eye. The small, rod-shaped implant is administered directly to the vitreous using a dedicated applicator, and releases drug for up to 6 months after administration. Sustained release is achieved by embedding dexamethasone in a matrix of 50:50 poly(lactic-co-glycolic acid) (PLGA). In this work, the Ozurdex implant was thoroughly characterized to enable the reverse engineering of a compositionally and structurally equivalent implant. Advanced imaging techniques such as scanning electron microscopy (SEM) and microcomputed tomography (microCT) revealed that the Ozurdex implant exhibits an irregular surface and an internal porosity of 6% due to a large number of discrete voids approximately 3 μm in diameter. Thermal and spectroscopic analyses showed limited interaction between the drug and the polymer, resulting in a two-phase system of dexamethasone crystals embedded within a PLGA matrix. Reverse-engineered implants with properties similar to Ozurdex were prepared using a two-step hot-melt extrusion process. The reverse-engineered implants exhibited a triphasic drug release profile similar to Ozurdex. This work seeks to provide insight into the manufacturing process and characterization of PLGA–based solid implants to support future generic product development.