材料科学
阳极
复合数
图层(电子)
枝晶(数学)
锂(药物)
化学工程
复合材料
金属锂
涂层
降级(电信)
电极
纳米技术
电解质
医学
化学
几何学
数学
工程类
物理化学
内分泌学
电信
计算机科学
作者
Eun Kwang Jang,Jinhyeok Ahn,Sukeun Yoon,Kuk Young Cho
标识
DOI:10.1002/adfm.201905078
摘要
Abstract The development of lithium metal anodes for next generation batteries remains a challenge. Uncontrolled Li dendrite growth not only induces severe safety issues but also leads to capacity fading by continuously consuming the electrolyte. This study demonstrates the design and fabrication of a composite protective layer composed of a high dielectric polymer, inorganic particles, and an electrolyte to overcome these obstacles. This layer not only suppresses dendrite growth, but also prevents LiPF 6 degradation. The electrolyte introduced in the protective layer remains within the coating layer after solvent removal and acts as an ion transport channel at the interface. This enables the protective layer to exhibit high ionic conductivity and mechanical strength. The composite protective layer, which exhibits synergistic soft‐rigid characteristics, is placed on the Li metal anode and facilitates superior interfacial stability during long‐term cycles. LiMn 2 O 4 /coated lithium full cells using the composite protective layer show a superior rate capability and enhanced capacity retention compared to the cells using a bare lithium anode. The proposed strategy opens new avenues to fabricate a sustainable composite protective layer that affords superior performance in lithium metal batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI