水解
纤维素
纳米晶
碱金属
硫酸化
表面电荷
材料科学
化学工程
电荷(物理)
纳米技术
化学
有机化学
物理化学
工程类
物理
生物化学
量子力学
作者
Jacobs H. Jordan,Michael W. Easson,Brian Condon
出处
期刊:Nanomaterials
[Multidisciplinary Digital Publishing Institute]
日期:2019-08-30
卷期号:9 (9): 1232-1232
被引量:60
摘要
Cellulose nanocrystals (CNCs) are a biorenewable resource, which may be chemically modified to impart specific properties. Modified CNCs have found use in imaging applications, as rheology modifiers, polymer reinforcements, barrier and/or optical films, and nanocomposites. Nanoparticle dimensions of CNCs are typically 5-10 nm in width, with lengths of <100-300 nm. However, the physical properties are dependent upon the number and nature of the surface charge groups imparted during preparation. In the case of CNCs produced from sulfuric acid hydrolysis, the sulfated surface groups may be partially removed prior to further functionalization. This gives more available hydroxyls yet renders the CNCs less colloidally stable. Furthermore, conditions vary significantly and there is no consensus about the optimal conditions for partial removal of sulfate functionality or conditions developed to give specific surface charge. In the following, alkali hydrolysis of sulfate half-esters was quantified by conductometric titration of the strong acid groups, and using a design of experiments (DOE), optimal conditions were determined to produce CNCs with tailored surface charge.
科研通智能强力驱动
Strongly Powered by AbleSci AI