金属陶瓷
微观结构
材料科学
钼
抗弯强度
冶金
粒度
弯曲
相(物质)
复合材料
陶瓷
有机化学
化学
作者
Wenyan Zhai,Yimin Gao,Liang Sun,Yuelei Xiao,Lin He,Yiran Wang
标识
DOI:10.1080/09603409.2017.1312089
摘要
Effect of Mo addition on the microstructure and mechanical properties of Cr3C2-20 wt. % Ni cermet was investigated. Three different phases can be seen in the microstructure after adding appropriate molybdenum. The completely undissolved (Cr, Mo)3C2 phase maintains the original grain size and effectively prevents the (Cr, Mo)7C3 grains from merging and growing. The relative densities of the sintered specimens decrease slightly, while the hardness and bending strength increase firstly and then decrease slightly with the increase of Mo content. The maximum values of the hardness (88·6 HRA) and bending strength (1200 MPa) are achieved with 1 wt. % Mo addition.
科研通智能强力驱动
Strongly Powered by AbleSci AI