电池(电)
材料科学
热的
冶金
环境科学
汽车工程
法律工程学
热失控
复合材料
汽车蓄电池
作者
Zhenxing Sun,Yafei Guan,Cong Liang,Meng Yang,Zhi Cao,Zixiang Wang,Y. H. Xie,Juqiang Li
标识
DOI:10.1109/etep67941.2025.11440368
摘要
With the widespread adoption of lithium-ion batteries in electric vehicles, energy storage systems, and consumer electronics, the risk of thermal runaway has emerged as a critical safety challenge. Thermal runaway not only compromises the integrity of individual battery cells but may also lead to cascading failures in adjacent cells. This study examines the effectiveness of a two-component silicone-based coating material in suppressing thermal runaway propagation within lithium-ion battery packs. The coating, applied to the battery separator, enhances thermal stability and impedes heat transfer. Through controlled comparative experiments, the thermal behavior of battery packs with and without the coating was evaluated under charge- discharge cycling and induced thermal runaway conditions. Results indicate that the coated configuration significantly reduces peak temperatures in neighboring cells, delays the onset of thermal propagation, and decreases the duration of combustion events. These findings demonstrate that the silicone-based coating improves overall battery safety by mitigating thermal runaway (TR) propagation, thereby presenting a viable solution for enhancing the safety of high-energy-density battery systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI