材料科学
退火(玻璃)
薄膜
电介质
原子层沉积
无定形固体
分析化学(期刊)
薄脆饼
光电子学
复合材料
纳米技术
结晶学
化学
色谱法
作者
Halit Altuntaş,İnci Dönmez,Çağla Özgit-Akgün,Necmi Bıyıklı
出处
期刊:Journal of vacuum science & technology
[American Institute of Physics]
日期:2014-05-21
卷期号:32 (4)
被引量:45
摘要
Ga2O3 dielectric thin films were deposited on (111)-oriented p-type silicon wafers by plasma-enhanced atomic layer deposition using trimethylgallium and oxygen plasma. Structural analysis of the Ga2O3 thin films was carried out using grazing-incidence x-ray diffraction. As-deposited films were amorphous. Upon postdeposition annealing at 700, 800, and 900 °C for 30 min under N2 ambient, films crystallized into β-form monoclinic structure. Electrical properties of the β-Ga2O3 thin films were then investigated by fabricating and characterizing Al/β-Ga2O3/p-Si metal–oxide-semiconductor capacitors. The effect of postdeposition annealing on the leakage current densities, leakage current conduction mechanisms, dielectric constants, flat-band voltages, reverse breakdown voltages, threshold voltages, and effective oxide charges of the capacitors were presented. The effective oxide charges (Qeff) were calculated from the capacitance–voltage (C-V) curves using the flat-band voltage shift and were found as 2.6 × 1012, 1.9 × 1012, and 2.5 × 1012 cm−2 for samples annealed at 700, 800, and 900 °C, respectively. Effective dielectric constants of the films decreased with increasing annealing temperature. This situation was attributed to the formation of an interfacial SiO2 layer during annealing process. Leakage mechanisms in the regions where current increases gradually with voltage were well fitted by the Schottky emission model for films annealed at 700 and 900 °C, and by the Frenkel–Poole emission model for film annealed at 800 °C. Leakage current density was found to improve with annealing temperature. β-Ga2O3 thin film annealed at 800 °C exhibited the highest reverse breakdown field value.
科研通智能强力驱动
Strongly Powered by AbleSci AI