材料科学
尖晶石
阴极
法拉第效率
涂层
化学工程
氧化物
锂(药物)
电化学
纳米技术
电极
化学
冶金
医学
物理化学
内分泌学
工程类
作者
Jili Li,Junwei Zhao,Chunjuan Tang,Tiekun Jia,Jianhua Hou,Chuanbao Cao,Youqi Zhu
标识
DOI:10.1016/j.jpowsour.2021.230427
摘要
Lithium-rich layered oxides are widely considered as the most promising candidate for high energy density cathode in lithium-ion batteries (LIBs) due to their extraordinary capacity. However, cycle instability, poor rate capability and voltage decay impede their practical applications, which are caused by oxygen release and phase transformation during cycling. In this work, an ultrathin spinel Li4Ti5O12 (LTO) coating acting alike a "lithium ion pump" is built on the surface of lithium-rich layered oxides Li1.2Ni0.2Mn0.6O2 (LLNMO) through solvothermal method. It is identified that spinel LTO and layered LLNMO phases display heteroepitaxial structure resulting in reduction of oxygen loss, phase transformation, capacity decline and voltage fading. The cathode with heteroepitaxial structure demonstrates an acceptable initial coulombic efficiency up to 87.7% (only 79.8% for LLNMO), highly competitive cycling stability (97.9% capacity retention at 0.1C after 100 cycles), minimal voltage decay of 1.22 mV cycle−1 and excellent rate capability (171.5 mAh g−1 at 10C). The supreme electrochemical performances suggest that epitaxial spinel LTO coating can effectively stabilize oxygen framework and the layered structure on the surface of lithium-rich layered oxides for modification of high-capacity cathode in next generation LIBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI