散热片
微流控
材料科学
数码产品
传热
可靠性(半导体)
计算流体力学
机械工程
热的
计算机冷却
水冷
计算机科学
机械
电子设备和系统的热管理
航空航天工程
工程类
纳米技术
电气工程
物理
气象学
功率(物理)
量子力学
作者
John J. Ditri,Joseph W. Hahn,Roland Cadotte,Michael McNulty,Denise Luppa
标识
DOI:10.1115/ipack2015-48689
摘要
Embedded cooling techniques, utilizing microfluidic channels directly within a die substrate or in a miniature heat sink attached to the base of the die, have been known for decades [1] [2] [3]. Despite their demonstrated thermal benefits, such techniques and devices have not been successfully transitioned from the laboratory to either the commercial or military arena. Some of the hurdles preventing implementation to date have been the inability to miniaturize the supporting hardware, the high unit cost of fabricating individual microfluidic coolers, and the unknown reliability of the new technologies introduced. Recent advances in micro manufacturing and co-design/simulation capabilities have enabled significant progress to be made, aided by a significant new focus on embedded cooling technologies was recently initiated by DARPA [4]. This paper will present a recently fabricated embedded cooling system consisting of a state of the art, micro-miniature, 3D microfluidic manifold suitable for near term integration into existing systems. Computational fluid dynamics (CFD) and conjugate heat transfer (CHT) simulations demonstrate the ground breaking thermal performance achieved by the device, and coupled-field flow, thermal, structural and erosion simulations are also presented to address some of the reliability concerns. Finally, measured thermal performance is presented, validating the predicted thermal performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI