微透镜
光刻胶
硅
材料科学
基质(水族馆)
制作
反应离子刻蚀
光电子学
蚀刻(微加工)
光学
干法蚀刻
纳米技术
镜头(地质)
物理
图层(电子)
病理
地质学
替代医学
海洋学
医学
作者
Jianhua Yan,Wen Ou,Yi Ou
标识
DOI:10.1088/1674-4926/33/3/034008
摘要
A simple method has been developed for the fabrication of a silicon microlens array with a 100% fill factor and a smooth configuration. The microlens array is fabricated by using the processes of photoresist (SU8-2005) spin coating, thermal reflow, thermal treatment and reactive ion etching (RIE). First, a photoresist microlens array on a single-polished silicon substrate is fabricated by both thermal reflow and thermal treatment technologies. A typical microlens has a square bottom with size of 25 μm, and the distance between every two adjacent microlenses is 5 μm. Secondly, the photoresist microlens array is transferred to the silicon substrate by RIE to fabricate the silicon microlens array. Experimental results reveal that the silicon microlens array could be formed by adjusting the quantities of the reactive ion gases of SF 6 and O 2 to proper values. In this paper, the quantities of SF 6 and O 2 are 60 sccm and 50 sccm, respectively, the corresponding etch ratio of the photoresist and the silicon substrate is 1 to1.44. The bottom size and height of a typical silicon microlens are 30.1 μm and 3 μm, respectively. The focal lengths of the microlenses ranged from 15.4 to 16.6 μm.
科研通智能强力驱动
Strongly Powered by AbleSci AI