Top surface and side roughness of Inconel 625 parts processed using selective laser melting

Purpose – Obtaining the required part top surface roughness and side roughness is critical in some applications. Each of these part properties can often be improved to the detriment of the other during selective laser melting (SLM). The purpose of this paper is to investigate the selective laser melting of Inconel 625 using an Nd:YAG pulsed laser to produce thin wall parts with an emphasis on attaining parts with minimum top surface and side surface roughness.Design/methodology/approach – A full factorial approach was used to vary process parameters and identify a usable Inconel 625 processing region. The effects laser process parameters had on the formation of part surface roughness for multi‐layer parts were examined. Processing parameters that specifically affected top surface and side roughness were identified.Findings – Higher peak powers tended to reduce top surface roughness and reduce side roughness as recoil pressures flatten out the melt pool and reduce balling formation by increasing wettabilit...