Augmented Heat Transfer for Angled Rib With Intersecting Rib in Rectangular Channels of Different Aspect Ratios

This study was an experimental investigation of the effect of an intersecting rib on heat/mass transfer performance in rectangular channels with angled ribs and different aspect ratios. In a rib-roughened channel with angled ribs, heat/mass transfer performance deteriorates as the channel aspect ratio increases, since the vortices induced by angled ribs diminish with increasing aspect ratio. A longitudinal rib that bisects the angled ribs is suggested to overcome this disadvantage. The heat transfer performance of angled rib configurations with a 60° attack angle were tested with and without an intersecting rib using naphthalene sublimation method. The channel aspect ratio is varied from 1 to 4. When the intersecting rib was present, additional vortices were generated at every point of intersection with the angled ribs. Thus the heat/mass transfer performance was significantly enhanced for all channel aspect ratios when an intersecting rib was added to an ordinary angled rib configuration.