散裂
材料科学
兴奋剂
冶金
核物理学
光电子学
中子
物理
作者
Dijuan Han,Xi Pan,Tianfang Sun,Yixiang Xu,Yun Shen,Zhaopeng Tong,Yaran Niu,Xuebin Zheng
标识
DOI:10.1016/j.jmrt.2025.04.184
摘要
The oxidation behaviors of the TiAlCr alloys with and without reactive elements (REs) of Y or Hf were investigated under isothermal oxidation conditions at 1000 °C and 1100 °C, respectively. It was shown that the oxidation resistance of TiAlCr-0.4Hf was the best, followed by TiAlCr-0.4Y and the free-doped one at 1000 °C. After oxidation at 1100 °C for 200 h, the spallation ratio of the oxide layer on TiAlCr-0.4Hf was only about 2 %, nearly one-sixth and one-fourteenth of those for free-doped TiAlCr and TiAlCr-0.4Y, respectively. These results indicated that the addition of Hf could improve the interfacial toughness of the oxide layer, which benefited from the weak S segregation and the reductions of both imperfections (e.g., RE-rich oxides) and micropores at the oxide layer/alloy interface. These effects are achieved more efficiently than the Y addition, thereby ensuring a superior spallation resistance of the oxide layer on TiAlCr-0.4Hf alloy during high-temperature exposure.
科研通智能强力驱动
Strongly Powered by AbleSci AI