Research on equivalent thermal network modeling for rare-earth giant magnetostrictive transducer

Of crucial importance for giant magnetostrictive transducers (GMTs) design is to quickly and accurately analysis the temperature distribution. With the advantages of low calculation cost and high accuracy, thermal network modelling has been developed for thermal analysis of GMT. However, the existing thermal models have their limits to describe these complicated thermal behaviors in the GMTs: most of researches focused on steady-state which is incapable of capturing temperature variances; the temperature distribution of giant magnetostrictive (GMM) rods is generally assumed to be uniform whereas the temperature gradient on the GMM rod is remarkable due to its poor thermal conductivity; the non-uniform distribution of GMM's losses is seldom introduced into thermal model. Therefore, a transient equivalent thermal network (TETN) model of GMT is established in this paper, considering the aforementioned three aspects. Firstly, based on the structure and working principle of a longitudinal vibration GMT, thermal analysis was carried out. Following this, according to the heat transfer process of GMT, the TETN model was established and the corresponding model parameters were calculated. Finally, the accuracy of the TETN model for the temporal and spatial analysis of the transducer temperature are verified by simulation and experiment.