One-dimensional modelling of air injection into abandoned oil fields for heat generation

With the global drive for net-zero emissions, it has never been more important to find clean energy sources. There are thousands of abandoned oilfields worldwide with the potential to be reactivated to produce clean energy with air injection and subsequent waste fluid sequestration. Air injection, and the development of a fire-front, may be used with enhanced geothermal systems by taking advantage of the inherent increase in heat and pressure. Conventionally used as an enhanced oil recovery technique, air injection has gained the reputation of being a high-risk intervention due to the many failures in its history. Knowledge of how petrophysical rock properties and oil physical and chemical properties control the consequences of air injection is key to optimzing the selection of late-life, or even abandoned oilfields for use in such systems. Here we use one-dimensional modelling to test the effect of varying porosity, permeability, oil viscosity and API gravity on the success of air injection. Modelling shows that the most important factor controlling temperature is the porosity of the reservoir, followed by the API gravity and then the viscosity of the oil. The most important factors controlling velocity of the fire-front are API gravity followed by oil viscosity. We show that reservoirs with high porosity and low permeability with high viscosity and low API gravity oil reach the highest fire-front temperatures. The significance of this work is that it provides several geoscience-related criteria to rank possible candidate reservoirs for reactivation and clean energy generation via air injection: the best candidates will have the highest total porosity, relatively low permeability, highest oil viscosity and lowest API gravity, such fields can then move on to bespoke and more complex simulations.