Thin nanocrystalline CeO2, ZrO2 or Ta2O5 films were deposited onto substrates. Their sintering behavior was characterized and compared with the known equivalent TiO2 special effect pigments in terms of grain size, grain growth and layer porosity. These oxide layers were then converted into Ce2S3, Zr2ON2 and Ta3N5 in a fluidized bed prototype controlling the reaction conditions. The use of this method leads to a drastic reduction of the time of conversion compared to a stationary oven or to a rotary kiln. The color travel of the resulting products was analyzed using the CIELAB system. The intensity of the interference color was correlated with the effective refractive indices of these films, which also depends on their porosity. Keywords: Oxide Layers, Sintering, Interference Color, Fluidized Bed