ABSTRACT Traditional titanium‐based catalysts for polyethylene terephthalate (PET) synthesis suffer from serious TiO 2 aggregation, poor dispersion, and an inability to balance catalytic activity and anti‐yellowing performance, limiting their practical application. To address these issues and promote the green substitution of antimony‐based catalysts, a SiO 2 /TiO 2 composite catalyst was prepared via a sol–gel method using tetraethyl orthosilicate and tetrapropoxysilane as dual silicon sources and titanium isopropoxide as the titanium source. The dual‐silicon strategy enabled the formation of stable Ti–O–Si interfacial bonds, which suppressed TiO 2 agglomeration, improved catalyst dispersion, and modulated the Lewis acidity of Ti 4+ sites. The catalyst exhibited a high specific surface area (443.8 m 2 g −1 ) and uniform Ti 4+ distribution. At a low dosage (0.005 wt%), it afforded PET with an intrinsic viscosity of 0.706 dL g −1 , a viscosity‐average molecular weight of 19,985 g mol −1 , and the Hunter b coordinate is 3.69, outperforming pure TiO 2 . Notably, the catalyst required no high‐temperature calcination and was obtained by room‐temperature stirring and low‐temperature vacuum drying. With low cost and good structural stability, it shows promising potential for industrial PET production.