库仑法
质子交换膜燃料电池
电化学
材料科学
电极
氢
分析化学(期刊)
化学
粒子(生态学)
图层(电子)
膜
还原(数学)
化学工程
表层
电压
电流(流体)
催化作用
时间常数
接触电阻
复合材料
安培法
循环伏安法
等效串联电阻
制氢
作者
Charline Rémy,Fabrice Micoud,Armelle Fabulet,Benoît Gouze,Sébastien Rosini,Arnaud Morin
标识
DOI:10.1149/1945-7111/ae888d
摘要
This study evaluates break-in protocols for Pt/Vulcan-XC-72 cathode-based membrane electrode assemblies in PEMFCs. Fast, high-current protocols, lasting under 20 min at low voltage, were compared to a conventional 7-hour constant current procedure. The rapid protocols yielded to higher initial performance and saved up to 91.5% for hydrogen consumption. To elucidate governing mechanisms during break-in, electrochemical analyses were performed. Paradoxically, performance improved despite a modest decrease in electrochemical surface area, notably, voltage cycling induced a 16% specific surface loss, versus 5% for holding. While high-frequency resistance decreased by 16%–19% due to fast membrane hydration, its impact on performance remained modest. Instead, catalyst layer effective protonic resistance ( R eff, H+, CL ) emerged as the dominant factor governing performance, attributed to the reduction of proton transport limitation. Fast protocols yielded significant R eff, H+, CL reductions up to 38%, respectively, whereas the long protocol showed no significant change. These gains correlate with an increase in PtOx coulometry reduction charge and refined CO stripping peak shifted to lower potential, consistent with slight particle growth. These findings indicate that break-in is primarily a hydration-driven restructuring of the catalyst/ionomer interface rather than simple surface cleaning. These mechanisms-based understanding validates rapid protocols for industrial use.
科研通智能强力驱动
Strongly Powered by AbleSci AI