Growing perovskite on textured silicon

Solar Cells Wide–band gap perovskites could boost the efficiency of silicon solar cells by forming tandem cells, but usually the perovskite must be grown on a smoothed side of the silicon cell because the material grown on the rough light-trapping side often does not fully coat the silicon surface and its rough texture is prone to phase separation. Hou et al. grew thick films of a perovskite with a band gap of ∼1.68 electron volts and used a passivant, 1-butanethiol, to limit its phase separation. The tandem cells had a certified power conversion efficiency of 25.7% and had negligible losses after 400 hours of operation. Science , this issue p. [1135][1] [1]: /lookup/doi/10.1126/science.aaz3691