石墨烯
材料科学
傅里叶变换红外光谱
纳米复合材料
溶剂热合成
拉曼光谱
透射电子显微镜
分析化学(期刊)
扫描电子显微镜
氧化物
电化学气体传感器
电化学
核化学
硫脲
化学工程
纳米技术
无机化学
化学
电极
复合材料
光学
有机化学
冶金
物理化学
工程类
物理
作者
Lu Gao,Junping Ma,Jianbin Zheng
标识
DOI:10.1149/1945-7111/ab82fc
摘要
Antimony sulfide graphene oxide (Sb2S3-GO) was synthesized using a solvothermal method for electrochemical detection of dopamine (DA). Thiourea acted as a sulfur source, while polyvinyl pyrrolidone (PVP) acted as a surfactant to fabricate nanoproduct in the presence of GO. X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectra, Energy-dispersive X-ray spectrum (EDS), Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) were employed to characterize Sb2S3-GO nanocomposite, and the results exhibited a large number of spherical Sb2S3 particles were attached to the surface of GO. Electrochemical techniques were used to study the performance of sensor, and the results showed the sensor has excellent electrochemical characteristics to detect DA with linear ranges of 1.55 μM–15.55 μM, 15.55 μM–0.35 mM, excellent sensitivity of 307.7 μA mM−1 cm−2 and 205.4 μA mM−1 cm−2, and a low detection limit of 0.8 μM (at an S/N radio of 3). Therefore, Sb2S3-GO can be used potential sensing material to detect dopamine.
科研通智能强力驱动
Strongly Powered by AbleSci AI