Effect of cooling circuit duration on formation of solidification shrinkage in A356 casting automative wheels

作者
Rafael Jung Hoon Lee
出处
期刊:Auckland University of Technology - Tuwhera 被引量:2
摘要

Low Pressure Die Casting (LPDC) process is one the most common casting process to produce structural automotive components, such as alloy wheels and suspension components. It has been identified that cavity filling and solidification process are two most critical aspects to produce premium quality casting components.During the solidification process of casting alloy, it is a well known phenomenon that metal experiences volumetric shrinkage due to its density difference between liquid and solid phase. When this volumetric shrinkage is not properly compensated, then a casting defect commonly known as solidification shrinkage occurs. The solidification shrinkage has very detrimental effects on structural integrity required for premium quality casting such as aluminium alloy wheels.Literature and practical experiences of foundry men show that it is critical to achieve unidirectional solidification pattern by avoiding an isolated hot spot in order to minimise the solidification shrinkage. However, it is found that the geometry of industrial casting applications is often constrained by other design factors that would not naturally avoid these isolated hot spots. The subject of this research, aluminium alloy wheels, is not excluded from this constraint.In aluminium alloy wheels, an isolated hot spot is commonly observed in an area known as rim and spoke junction due to its geometry constraints. Consequently, the solidification shrinkage is commonly experienced, which is undesirable due to its detrimental effects for the structural integrity of alloy wheels. In order to minimise the solidification shrinkage, forced cooling method is applied to avoid an isolated hot spot. The control of this forced cooling is achieved by cooling media, flow rate of cooling media and duration cooling circuit. Foundry experiments in industrial environment were conducted producing aluminium alloy wheels using commercially treated A356 (Al-Si) alloy, where different durations of cooling circuit were used to understand the sensitivity of solidification shrinkage formation to the duration of cooling circuit. This was followed by metallurgical structure analysis and numerical modelling to suggest the sensitivity of cooling circuit duration in controlling solidification shrinkage.The major finding conclusion of this research is that control of the shrinkage formation is not very sensitive to the duration cooling circuit. It is suggested that as casting solidifies initially from the mould wall, it retracts away from the cast-mould interface due to thermal contraction. Consequently, air gap is formed between casting and mould interface, creating an effective thermal resistance layer. Thereafter, heat transfer across the cast-mould interface is not sensitive to the change in the cooling channel which is a distance to the cast-mould interface.Some limitations of numerical modelling and metallurgical analysis were also identified during this research and recommendations were made to improve the accuracy of local hot spot prediction in production of aluminium alloy wheels. More specifically, numerical modelling of the effect of grain refinement and use of non homogeneous material property (particularly fraction of solid) for rapidly chilled area. Fraction of eutectic rather than secondary dendrites arm spacing is a proper microstructure parameter that can be used to locate the hot spot.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
Seldomyg完成签到,获得积分10
1秒前
健壮羊青完成签到,获得积分10
1秒前
victorique112发布了新的文献求助10
1秒前
1秒前
1秒前
JXDYYZK完成签到,获得积分0
1秒前
beizi完成签到,获得积分10
1秒前
2秒前
友好纹完成签到 ,获得积分10
2秒前
麻薯的应助被steambun采纳,获得10
2秒前
马也发布了新的文献求助10
3秒前
3秒前
treasure完成签到,获得积分10
3秒前
小马完成签到,获得积分10
3秒前
小剧场发布了新的文献求助10
4秒前
Jery完成签到,获得积分10
4秒前
4秒前
yyyyzx完成签到,获得积分10
4秒前
共享精神的应助被无忧sxt采纳,获得10
4秒前
药化行者完成签到,获得积分10
4秒前
不吃番茄完成签到,获得积分10
5秒前
5秒前
bkagyin的应助被zhanjl13采纳,获得10
5秒前
酷炫的迎彤关注了科研通微信公众号
5秒前
wxtlzzdp完成签到,获得积分10
5秒前
DW的应助被时光可喜采纳,获得10
5秒前
Eason不吭完成签到,获得积分10
5秒前
零壹完成签到 ,获得积分10
6秒前
如意小虾米完成签到 ,获得积分10
6秒前
6秒前
马耳完成签到,获得积分10
6秒前
7秒前
正直眼神完成签到,获得积分10
7秒前
马敬丽完成签到,获得积分10
8秒前
晓晓完成签到,获得积分20
8秒前
chen的应助被aha洋子采纳,获得10
8秒前
秋风的应助被顺利的莺采纳,获得10
8秒前
8秒前
科研路顺遂完成签到,获得积分10
8秒前
贪玩树叶完成签到,获得积分10
8秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8180407
求助须知:如何正确求助?哪些是违规求助? 9570403
关于积分的说明 21811831
捐赠科研通 7776452
什么是DOI,文献DOI怎么找? 3433277
关于科研通互助平台的介绍 2557499
邀请新用户注册赠送积分活动 2479105