材料科学
锆钛酸铅
压电
聚酰亚胺
复合数
复合材料
压力传感器
电压
能量收集
开路电压
压电传感器
光电子学
图层(电子)
电气工程
能量(信号处理)
铁电性
电介质
机械工程
统计
工程类
数学
作者
Gang Wang,Meng Li,Jiapeng Zhang,Zeqian Liang,Zebo Shen,Lantao Liu,Zhijie Jiang,Xiaohong Chen,Huaihe Song
标识
DOI:10.1016/j.jcomc.2022.100292
摘要
Flexible piezoelectric pressure sensors have been paid great attention in wearable electronic devices, obtaining mechanical energy and driving portable devices. Presently, membranes based on piezoelectric ceramic/polymer composite materials encounter problems such as filler agglomeration and surface defects, which affects the energy conversion performance of piezoelectric devices. Herein, the surface of lead zirconate titanate (Pb(Zr0.52Ti0.48)O3, PZT),was modified by coupling agent-polydopamine (Pdop), and combined with the polyimide (PI) matrix by in-situ polymerization to form a uniform [email protected]/PI composite. This polydopamine modification method increases the compatibility between the two components, and promotes the dispersion of PZT in the polyimide matrix more uniform. Under the external force of 10 N, the maximum open circuit voltage of [email protected]/PI-based piezoelectric pressure sensor (PPS) can reach 12.8 V. In addition, the sensitivity of the sensor is 1.4 V/N (0.24 V/kPa), which can maintain a stable output voltage under different frequencies of external force. After 10,000 cycles of periodic impacting/releasing, the open circuit voltage of PPS remained stable, indicating that the device has excellent stability and durability. It has the potential to be used as self-powered wearable sensors and detect human motion in daily life.
科研通智能强力驱动
Strongly Powered by AbleSci AI