材料科学
热解
微观结构
复合材料
碳热反应
原位
烧蚀
图层(电子)
石墨
化学工程
碳化物
物理
工程类
航空航天工程
气象学
作者
Ze Zhang,Cunqian Fang,Anhong Shi,Yuanqi Weng,Lei Zheng,Qizhong Huang,Huiping Hu
标识
DOI:10.1002/adem.202101788
摘要
With the use of a novel precursor, SiC granules together with nanofibers were grown in situ in C/C felt utilizing sol–gel and precursor impregnation and pyrolysis methods. The results showed that the precursor possessed low residual carbon after the carbothermal reduction reaction. Moreover, owing to the gas–gas reaction between SiO and CO, the generated SiC largely filled the microvoids in the regions of the non‐woven layer. Furthermore, the in situ grown SiC of the composites was more continuous than the nubby SiC of polycarbosilane because of the uniform filling of SiC particles and nanofibers. All these factors are conducive to the formation of a compact layer of SiO 2 during ablation by increasing the molten glass and impeding the infiltration of O 2 . As a result, the fabricated C/C–SiC composites exhibited better ablation resistance, and the linear and mass ablation rates were 7.284 ± 0.307 μm s −1 and 0.218 ± 0.023 mg s −1 , respectively, after ablation for 120 s.
科研通智能强力驱动
Strongly Powered by AbleSci AI