嵌入
煤
材料科学
岩土工程
变形(气象学)
软化
本构方程
可塑性
断裂(地质)
地质学
机械
石油工程
复合材料
结构工程
有限元法
工程类
物理
废物管理
作者
M.A.A. Ahamed,M.S.A. Perera,P.G. Ranjith
出处
期刊:Fuel
[Elsevier]
日期:2022-06-01
卷期号:317: 123488-123488
被引量:1
标识
DOI:10.1016/j.fuel.2022.123488
摘要
Proppant embedment in coal is highly concerned in both research and practice due to the vulnerability of the softer surface nature in coal and its involvement in fracture treatment failures. The issue has been reported to further intensify under pore fluid conditions; however, to date very few studies have investigated this effect for coal propped fractures. Analysing proppant embedment in numerical models through standard material models is far from realistic for materials like coal because the distinct plastic deformation stages play an essential role in proppant embedment measurements. In this study, a Drucker Prager material model is implemented, which employs the shrinking of the failure criteria by the progress of plastic deformation to consider the strain-softening behaviour of coal. The numerical results show that the implemented material model can describe the distinct deformation stages experienced in coal materials. The simulation results for uniaxial compression tests, triaxial tests and proppant embedment tests agree well with their experimental counterparts. However, comparing the simulation and experimental results show that modification of the elastic modulus alone to incorporate surface changes experienced due to pore fluid saturations, which is the primary parameter considered in proppant embedment studies may provide an underestimation for proppant embedment measurements in coal.
科研通智能强力驱动
Strongly Powered by AbleSci AI