Comparison between the performance of an immobilized impinging jet stream reactor and a slurry impinging jet stream reactor for photocatalytic phenol degradation

A new immobilized photocatalytic impinging jet stream reactor was designed, and the influences of the effective parameters like jet flow rate, TiO2 coating disc diameter, nozzle-to-disc distance, and initial concentration on phenol removal were investigated. The reactor was also used as a slurry reactor, and degradation efficiencies in both reactors were compared based on their catalyst loading. The results indicated that the slurry reactor has a higher degradation efficiency than the immobilized reactor at the same TiO2 loading and other operational conditions. The slurry reactor needs to separate and recover the TiO2 nanoparticles from the reaction medium which increases the overall process complexity and cost, while the immobilized reactor could be reused at least 4times without any significant decrease in removal efficiency. RTD result indicates that the tank in series model (N = 5) could properly predict the reactors hydrodynamic behavior.