Pilot-scale experimental work on carbon dioxide sequestration using steelmaking slag

碳化作用 炼钢 烟气 碳酸钙 熔渣(焊接) 废物管理 二氧化碳 冶金 烟道 环境科学 材料科学 化学 工程类 有机化学 复合材料
作者
Arshe Said,Timo Laukkanen,Mika Järvinen
出处
期刊:Applied Energy [Elsevier BV]
卷期号:177: 602-611 被引量:61
标识
DOI:10.1016/j.apenergy.2016.05.136
摘要

The production of precipitated calcium carbonate (PCC) from steel slag has been proposed as a potential method of simultaneously reducing the CO2 emissions from the steelmaking process and turning its waste stream into a valuable product. On average the production of one ton of steel results in two tons of CO2 emissions and 600 kg of slag. Globally, more than 400 Mt of steel slag are produced annually. If all the slag were used for the production of PCC, 64 Mt CO2 could be utilized and 145 Mt of calcium carbonate would be produced. In 2014 the research group Energy Engineering and Environmental Protection at Aalto University in Finland has designed, constructed and tested the world’s first mineral carbonation pilot plant test facility that converts steel slag and CO2 into PCC. In batch mode the pilot plant can handle up to 20 kg of solid steel slag and 190 L of liquid solvent, and it can produce about 10 kg of calcium carbonate. The solvent can be regenerated and reused in the calcium extraction stage, which makes the process economically more feasible. Almost 80% of the calcium in the slag was extracted, while more than 70% of the CO2 was utilized and converted into PCC. In high temperature carbonation tests, ammonia gas was detected from the flue gases. At 60 °C more than 2 vol.% of NH3 was detected in the flue gas, and at 50 °C it was 0.65 vol.%, while at 45 °C the NH3 concentration in the flue gas was only 0.11 vol.%. To avoid ammonia evaporation, aragonite PCC can be produced at 45 °C by optimizing the CO2 flow rate. The paper presents the process design as well as the early results achieved from the pilot plant. The paper also presents technical challenges that occurred during the scale-up work and experiments.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
1618完成签到 ,获得积分10
刚刚
luxx完成签到,获得积分10
1秒前
鱼羊完成签到,获得积分10
1秒前
fantasy的应助被高贵土豆采纳,获得10
2秒前
无花果的应助被Believer采纳,获得10
2秒前
zoey发布了新的文献求助10
2秒前
STAR完成签到 ,获得积分10
2秒前
雷家完成签到,获得积分10
2秒前
FightingW完成签到,获得积分10
3秒前
3秒前
pp完成签到,获得积分10
3秒前
4秒前
Ppao7ii完成签到,获得积分10
4秒前
洋洋洋完成签到 ,获得积分10
5秒前
6秒前
CarryLJR发布了新的文献求助10
6秒前
尝原完成签到,获得积分10
6秒前
小蘑菇的应助被plj采纳,获得10
6秒前
maoning完成签到,获得积分10
6秒前
端庄幻桃发布了新的文献求助10
7秒前
7秒前
jyxm发布了新的文献求助10
7秒前
su完成签到 ,获得积分10
8秒前
8秒前
8秒前
9秒前
梅西完成签到,获得积分10
10秒前
10秒前
10秒前
曹梓聪发布了新的文献求助10
10秒前
mlg1552003发布了新的文献求助10
10秒前
刘晨发布了新的文献求助10
11秒前
11秒前
crazy发布了新的文献求助10
11秒前
11秒前
LUCKYY完成签到,获得积分10
12秒前
晴日海风吹完成签到,获得积分10
12秒前
13秒前
赘婿的应助被si采纳,获得10
13秒前
善良书南完成签到,获得积分20
13秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
Resource Recovery Handbook 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8175534
求助须知:如何正确求助?哪些是违规求助? 9567220
关于积分的说明 21791292
捐赠科研通 7770111
什么是DOI,文献DOI怎么找? 3431868
关于科研通互助平台的介绍 2556244
邀请新用户注册赠送积分活动 2477299