材料科学
纳米复合材料
能量收集
压电
可穿戴技术
纳米线
数码产品
钙钛矿(结构)
纳米技术
机械能
可穿戴计算机
纳米发生器
化学工程
复合材料
功率(物理)
电气工程
计算机科学
工程类
嵌入式系统
物理
量子力学
作者
Chang Kyu Jeong,Changyeon Baek,Angus I. Kingon,Kwi‐Il Park,Seung‐Hyun Kim
出处
期刊:Small
[Wiley]
日期:2018-04-14
卷期号:14 (19): e1704022-e1704022
被引量:194
标识
DOI:10.1002/smll.201704022
摘要
Abstract In the past two decades, mechanical energy harvesting technologies have been developed in various ways to support or power small‐scale electronics. Nevertheless, the strategy for enhancing current and charge performance of flexible piezoelectric energy harvesters using a simple and cost‐effective process is still a challenging issue. Herein, a 1D–3D (1‐3) fully piezoelectric nanocomposite is developed using perovskite BaTiO3 (BT) nanowire (NW)‐employed poly(vinylidene fluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)) for a high‐performance hybrid nanocomposite generator (hNCG) device. The harvested output of the flexible hNCG reaches up to ≈14 V and ≈4 µA, which is higher than the current levels of even previous piezoceramic film‐based flexible energy harvesters. Finite element analysis method simulations study that the outstanding performance of hNCG devices attributes to not only the piezoelectric synergy of well‐controlled BT NWs and within P(VDF‐TrFE) matrix, but also the effective stress transferability of piezopolymer. As a proof of concept, the flexible hNCG is directly attached to a hand to scavenge energy using a human motion in various biomechanical frequencies for self‐powered wearable patch device applications. This research can pave the way for a new approach to high‐performance wearable and biocompatible self‐sufficient electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI