聚乙烯醇
纳米纤维
乙烯醇
扫描电子显微镜
差示扫描量热法
材料科学
静电纺丝
聚合物
化学工程
电流体力学
核化学
高分子化学
化学
复合材料
电极
物理化学
工程类
物理
热力学
作者
Tanikan Sangnim,Sontaya Limmatvapirat,Jurairat Nunthanid,Pornsak Sriamornsak,Wancheng Sittikijyothin,Sumalee Wannachaiyasit,Kampanart Huanbutta
标识
DOI:10.1016/j.ajps.2018.01.002
摘要
In this study, we developed a polymeric nanofiber patch (PNP) for topical disease treatment using electrohydrodynamic atomization (EHDA). The nanofibers were prepared using various concentrations of polyvinyl alcohol (PVA) and tamarind seed gum and loaded with clindamycin HCl as a model drug. The precursor polymer solutions were sprayed using the EHDA technique; the EHDA processing parameters were optimized to obtain blank and drug-loaded PNPs. The skin adherence, translucence, and ventilation properties of the prepared PNPs indicated that they are appropriate for topical application. The conductivity of the polymer solution increased with increasing PVA and clindamycin concentrations, and increasing the PVA concentration enhanced the solution viscosity. Based on scanning electron microscopy analysis, the PVA concentration had a pronounced effect on the morphology of the sprayed product. Nanofibers were fabricated successfully when the solution PVA concentration was 10%, 13%, or 15% (w/v). The applied voltage significantly affected the diameters of the prepared nanofibers, and the minimum nanofiber diameter was 163.86 nm. Differential scanning calorimetry and X-ray diffraction analyses indicated that the model drug was dispersed in PVA in an amorphous form. The PNP prepared with a PVA:gum ratio of 9:1 absorbed water better than the PVA-only PNP and the PNP with a PVA:gum ratio of 9.5:0.5. Moreover, the PNPs loaded with clindamycin at concentrations of 1%–3% prohibited the growth of Staphylococcus aureus more effectively than clindamycin gel, a commercially available product.
科研通智能强力驱动
Strongly Powered by AbleSci AI