An Antiviral Drug—Peramivir: Degradation and Identification of Impurities and the Endorsement of an HPLC–MS Method

Abstract Background Peramivir is a neuraminidase inhibitor that serves as a transition state analogue for influenza neuraminidase, inhibiting the formation of new viruses in infected cells, and has been approved for intravenous administration. Objective To validate an HPLC method used to identify the degraded products of the antiviral drug peramivir. Methods Herein, we report the identification of compounds formed after the degradation of peramivir through acid, alkali, peroxide, thermal, and photolytic degradation. At the level of toxicology, a technique was devised for the isolation and measurement of peramivir. Results A sensitive and reliable LC–tandem mass spectrometry technique for the quantitative measurement of Peramivir and its impurities was developed and verified in order to comply with the recommendations made by the International Council for Harmonisation (ICH). The proposed protocol was in the 50–750 µg/mL range. Relative Standard Deviation values of less than 2.0% indicated good recovery in the range of 98.36–102.57%. Within the studied range, the calibration curves demonstrated good linearity and, in addition, the fitting of correlation coefficient was more than 0.999 for every impurity. Quantitative analysis of contaminants revealed the high efficiency at a low level. Conclusion Given its ability to separate degradation products, quantitative analysis is used to detect and quantify known and unknown impurities and degradants in the peramivir drug substance during routine analysis and stability studies. No significant degradation was found in peroxide and photolytic degradation studies. Highlights An HPLC method was developed and put to the test in order to analyze the behavior of the impurities of peramivir as they degraded when subjected to the stress conditions suggested by the ICH. Peramivir was found to be stable under peroxide and photolysis conditions but not stable or degradable when exposed to the acid, base, and thermal stress conditions. The method developed was extremely precise, linear, accurate, robust, and rugged. As a result, this technology has the potential to be used in the medication production process for regular impurity analysis as well as for the stability analysis of peramivir.