光纤布拉格光栅
材料科学
光热治疗
温度梯度
光学
光纤
温度测量
纤维
发热
光纤传感器
光电子学
纳米技术
复合材料
波长
物理
热力学
量子力学
作者
Qiaochu Yang,Deming Hu,Zesen Li,Zhiyuan Xu,Yang Ran,Bai‐Ou Guan
标识
DOI:10.1016/j.optlastec.2024.110759
摘要
Optical fiber-based photothermal devices show great promise for applications in in vivo detection and therapy. The integration of sensors and actuators in one fiber is a feasible method to orchestrate both functionalities. However, the photoheating-induced temperature field is not always homogeneous in the practical application, which undermines the accuracy of temperature monitoring using a single sensor. In this paper, we report a fiber Bragg grating probe to realize the gradient temperature generation and distributed detection along the axial direction simultaneously. The Bragg grating was inscribed into a fiber taper to obtain a diameter-dependent spectrum that harnessed chirped signals. The photothermal function was implemented by modifying gold nano-stars on the fiber surface as the light-heat converters. The fiber device can achieve a pumping efficiency higher than 0.21 °C/mW while maintaining a localized temperature rise of up to 60 °C in aqueous conditions. The device can effectively detect the gradient temperature and thus reveal the presence of significant temperature differences in the heating zones, which may result in a more precise evaluation of the heating effect. This work may provide new ideas for the applicational scenarios that necessitate the localized photothermal actuation and real-time feedback of the temperature field.
科研通智能强力驱动
Strongly Powered by AbleSci AI