材料科学
微观结构
合金
等温过程
超塑性
极限抗拉强度
冶金
锻造
粒度
延伸率
复合材料
齐纳钉扎
应变率
大气温度范围
热力学
钉扎力
物理
磁场
量子力学
临界电流
作者
A.G. Mochugovskiy,Ludmila Yu. Kaplanskaya,Ahmed O. Mosleh,V.V. Palacheva,Anastasia V. Mikhaylovskaya
出处
期刊:Applied sciences
[Multidisciplinary Digital Publishing Institute]
日期:2023-12-07
卷期号:13 (24): 13054-13054
被引量:1
摘要
This research is devoted to the microstructure evolution and deformation behavior of the Al-1.2Mg-0.7Si-1.0Cu-0.1Sc-0.2Zr alloy during the isothermal multidirectional forging (MDF) in a large cumulative strain and temperature range. The structure investigation of the studied alloy revealed several phases precipitated during solidification, among which θ(Al2Cu), Q(Al5Cu2Mg8Si6), Mg2Si, Sc-bearing W(AlScCu) and V(AlSi2Sc2) phases were observed. The MDF at 150–350 °C and a maximum cumulative strain of 14.4 significantly refined grain structure providing a mean grain size of 1.2–2.1 µm. The L12 structured Al3(Sc,Zr) dispersoids with a mean size of 10 ± 1 nm were formed during two-step homogenization annealing. Due to Zener pinning of the nanoscale dispersoids and fine-grained structure, the alloy exhibited near-superplastic behavior in a temperature range of 460–500 °C and strain rate range of 2 × 10−3–1 × 10−2 s−1 with the maximum elongation to failure of ~300%. After a strengthening heat treatment, the forged alloy exhibited the yield strength of 326 ± 5 MPa, ultimate tensile strength of 366 ± 5 MPa, and elongation of 10 ± 3%. The hot deformation behavior was described using the Arrhenius type model. The developed model demonstrated high predictability accuracy with a maximum average absolute relative error of 6.6%.
科研通智能强力驱动
Strongly Powered by AbleSci AI