材料科学
阴极
氧化物
电化学
化学工程
空隙(复合材料)
分解
纳米颗粒
纳米技术
复合材料
电极
化学
冶金
物理化学
有机化学
工程类
作者
Kanghyeon Kim,Seunggoo Jun,Tae-Hun Kim,Jong Seok Kim,Seunghyun Lee,Gawon Song,Junsung Park,Yoon Seok Jung,Kyu Tae Lee
标识
DOI:10.1021/acs.chemmater.4c00629
摘要
Interfacial degradation of Li 6 PS 5 Cl (LPSCl) with oxide cathode materials during cycling, particularly the formation of interfacial voids, leads to poor electrochemical performance. The formation of these voids is driven by two distinct mechanisms: the volumetric changes of oxide cathode materials during cycling and the volumetric shrinkage of LPSCl due to oxidative decomposition. However, the relative contribution of each route to void formation remains ambiguous, especially for nanostructured cathode materials. This study highlights the predominant influence of oxidative decomposition of LPSCl on the nanostructured LiCoO 2 surface in the formation of interfacial voids when compared to the volumetric changes of LiCoO 2 between charging and discharging. The interfacial degradation behavior is compared between bare LiCoO 2 and LiCoO 2 –Li 2 SnO 3 core–shell nanoparticles. Both types of nanoparticles exhibit comparable absolute volume changes of LiCoO 2 during cycling, due to their similar particle sizes and reversible capacities, effectively ruling out the impact of volumetric changes of LiCoO 2 on void formation. However, LiCoO 2 –Li 2 SnO 3 shows mitigated interfacial void formation compared to bare LiCoO 2, resulting in improved electrochemical performance. This is attributed to the fact that LiCoO 2 –Li 2 SnO 3 suppresses the oxidative decomposition of LPSCl due to the enhanced chemical stability of Li 2 SnO 3 with LPSCl. This reveals that the oxidative decomposition of LPSCl on the nanostructured LiCoO 2 surface contributes more significantly to void formation than the volume change of LiCoO 2 . These findings provide valuable insights into the degradation mechanisms of nanostructured cathode materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI