脱氢
动力学
催化作用
催化加氢
化学
核化学
化学工程
物理化学
材料科学
物理
有机化学
量子力学
工程类
作者
Xiang Zhou,Jianbo Li,Haotian Guan,Jiang Liu,Heng Lu,Yingxiang Zhao,Yuan Chen,Jingfeng Wang,Qian Li,Yangfan Lu,Fusheng Pan
标识
DOI:10.1021/acs.jpclett.4c01835
摘要
MXene based catalysts can significantly enhance hydrogenation and dehydrogenation (de/hydrogenation) kinetics of Mg/MgH 2, but they suffer from uncontrollable catalysts–hydrogen bond strength and structural instability. Here, we propose T x density control of MXene-based catalysts and MnO x coating as a promising solution. The MnO x @Ti 2 C T x -catalyzed Mg/MgH 2 can release 5.97 wt % H 2 at 300 °C in 3 min and 5.60 wt % H 2 at 240 °C in 15 min with an activation energy of 75.57 kJ·mol –1 . In addition, the samples showed excellent de/hydrogenation-cycle stability, and the degradation of hydrogen storage capacity is negligible even after 100 cycles. DFT calculations combined with XPS analysis showed that the T x defect on the surface of the MnO x @Ti 2 C T x catalyst could optimize the strength of the Ti–H bond, accelerating both hydrogen dissociation and diffusion processes. The catalyst’s surface properties were protected by the MnO x coating, achieving high chemical and catalytic stability. These findings offer a strategy for surface structure optimization and protection of MXene-based catalysts, realizing controllable catalyst–hydrogen bond strength.
科研通智能强力驱动
Strongly Powered by AbleSci AI