材料科学
散裂
微观结构
合金
氧化物
热障涂层
格子(音乐)
共晶体系
空位缺陷
扩散阻挡层
高温合金
涂层
涡轮叶片
复合材料
冶金
原子扩散
扩散
热膨胀
热的
凝聚态物理
结晶学
纳米技术
化学工程
高能
晶格扩散系数
工程物理
热阻
作者
Xinyu Zhang,Weiyan Lv,Xinguang Wang,Chuanmin Jia,Yizhou Zhou,Keqiang Qiu,Jianqiang Wang
标识
DOI:10.1002/advs.202522526
摘要
ABSTRACT The ongoing demand for high‐thrust turbine engines necessitates the advance of next‐generation structural materials capable of withstanding higher temperatures. Commercial MCrAlY alloy, used as bond coats crucial for thermal barrier coating (TBC) systems, face a fundamental temperature ceiling of ∼1100 °C due to accelerated oxidation and spallation. Here, we design a novel Y and Hf co‐doped NiCoCrAl‐type multi‐principal element alloy (MPEA) that achieves exceptional 1200 °C oxidation resistance primarily through lattice distortion‐induced diffusion suppression. Compared with typical NiCoCrAlY alloy, the MPEA exhibits 59% lower in thermally grown oxide (TGO) growth rate, as well as negligible TGO spallation after 500 h at 1200°C. This performance stems from a significantly refined eutectic structure enabling rapid formation of a protective Al 2 O 3 scale during initial oxidation, coupled with lattice distortion that elevates vacancy formation energy and Al migration barriers within the Al‐depletion zone (ADZ), drastically reducing sustained diffusion rates. This co‐design strategy, integrating tailored microstructure and lattice distortion, establishes a new paradigm for ultra‐stable performance in extreme environments.
科研通智能强力驱动
Strongly Powered by AbleSci AI