热塑性聚氨酯
压阻效应
材料科学
碳纳米管
软机器人
3D打印
纳米复合材料
制作
触觉传感器
纳米技术
复合材料
柔性电子器件
执行机构
弹性体
计算机科学
机器人
病理
替代医学
人工智能
医学
作者
Josef F. Christ,Nahal Aliheidari,Petra Pötschke,Amir Ameli
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2018-12-21
卷期号:11 (1): 11-11
被引量:195
标识
DOI:10.3390/polym11010011
摘要
Fabricating complex sensor platforms is still a challenge because conventional sensors are discrete, directional, and often not integrated within the system at the material level. Here, we report a facile method to fabricate bidirectional strain sensors through the integration of multiwalled carbon nanotubes (MWCNT) and multimaterial additive manufacturing. Thermoplastic polyurethane (TPU)/MWCNT filaments were first made using a two-step extrusion process. TPU as the platform and TPU/MWCNT as the conducting traces were then 3D printed in tandem using multimaterial fused filament fabrication to generate uniaxial and biaxial sensors with several conductive pattern designs. The sensors were subjected to a series of cyclic strain loads. The results revealed excellent piezoresistive responses with cyclic repeatability in both the axial and transverse directions and in response to strains as high as 50%. It was shown that the directional sensitivity could be tailored by the type of pattern design. A wearable glove, with built-in sensors, capable of measuring finger flexure was also successfully demonstrated where the sensors are an integral part of the system. These sensors have potential applications in wearable electronics, soft robotics, and prosthetics, where complex design, multi-directionality, embedding, and customizability are demanded.
科研通智能强力驱动
Strongly Powered by AbleSci AI