Pyrolysis-gasification of wastes plastics for syngas production using metal modified zeolite catalysts under different ratio of nitrogen/oxygen

The aim of this study was the syngas production by the gasification of plastic waste (polyethylene, polypropylene and terephthalate polyethylene). Ca, Ce, La, Mg and Mn were used to promote the Ni/ZSM-5 catalyst in order to enhance the production of higher syngas yield. The modified catalysts can enhanced the reaction rate of the pyrolysis process and resulting in high syngas in the product yields. Especially cerium, lanthanum promoted catalysts can enhance the yield of syngas. The effect of the reaction temperature and nitrogen/oxygen ratio of the carrier gas was also investigated. The maximum syngas production was obtained with lanthanum catalyst (112.2 mmol/g (95%N2 and 5%O2), and 130.7 mmol/g (90%N2 and 10%O2) at 850 °C. Less carbon depositions was found at 850 °C or even by the using of catalyst and more oxygen in the carrier gas. The oxygen content of the pyrolysis-gasification atmosphere had a key role to the syngas yield and affects significantly the carbon-monoxide/carbon-dioxide ratio. Catalysts can also accelerate the methanization reactions and isomerize the main carbon frame. Increasing in both temperature and oxygen in the atmosphere led to higher n-paraffin/n-olefin ratio and more multi-ring aromatic hydrocarbons in pyrolysis oils. The concentration of hydrocarbons containing oxygen and branched compounds was also significantly affected by catalysts.