The interaction of propagating opening mode fractures with preexisting discontinuities in shale

Abstract Field observations show that hydraulic fracture growth in naturally fractured formations like shale is complex. Preexisting discontinuities in shale, including natural fractures and bedding, act as planes of weakness that divert fracture propagation. To investigate the influence of weak planes on hydraulic fracture propagation, we performed Semicircular Bend tests on Marcellus Shale core samples containing calcite‐filled natural fractures (veins). The approach angle of the induced fracture to the veins and the thickness of the veins have a strong influence on propagation. As the approach angle becomes more oblique to the induced fracture plane, and as the vein gets thicker, the induced fracture is more likely to divert into the vein. Microstructural analysis of tested samples shows that the induced fracture propagates in the middle of the vein but not at the interface between the vein and the rock matrix. Cleavage planes and fluid inclusion trails in the vein cements exert some control on the fracture path. Combining the experimental results with theoretical fracture mechanics arguments, the fracture toughness of the calcite veins was estimated to range from 0.24 MPa m 1/2 to 0.83 MPa m 1/2 , depending on the value used for the Young's modulus of the calcite vein material. Measured fracture toughness of unfractured Marcellus Shale was 0.47 MPa m 1/2 .