Effects of Sintering Temperature and Finishing Procedure on Surface Roughness of Different Ytrria Content Zirconia

立方氧化锆 材料科学 烧结 表面粗糙度 表面光洁度 复合材料 陶瓷
作者
Canan Dogdu,Gülsüm Ceylan
出处
期刊:Journal of Clinical and Diagnostic Research [JCDR Research and Publications Private Limited]
标识
DOI:10.7860/jcdr/2022/51471.15844
摘要

Introduction: Zirconia-based ceramics have been successfully used to fabricate dental prostheses using the dental Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) system. Fabrication and finishing of new generation zirconia ceramics is an important issue for the success of restorations. It is necessary to investigate whether these processes affect the surface properties of zirconia materials. Aim: To investigate the effects of different sintering temperatures and finishing procedures on the surface roughness of zirconia. Materials and Methods: This in-vitro study was carried out in the Erciyes University Research Laboratory from 7th January to 4th April 2021. Katana Ultra Translucent Multi Layered (KT10; Kuraray Noritake Dental Inc., Tokyo, Japan) and Zolid High Translucent+Preshade (AmannGirrbach AG, Herrschaftswiesen, Austria) were the two types of zirconia materials used in this in-vitro study. Total 40 samples (20 in each group) were produced using the dry program in the I˙nLAB MC X5 milling machine (Dentsply Sirona, Bensheim, Germany). Total 20 specimens (10 from each group) were sintered in a furnace for 2 hour at 1450°C and the remaining 20 specimens (10 from each group) were sintered at 1650°C. The two surfaces of the specimens were divided into two groups; one surface of the specimens underwent polishing and the other underwent glazing. A profilometer was used to analyse the surface roughness of the specimens. Three-way analysis of variance was used to assess significant differences in the average roughness values based on the material, sintering temperature, finishing procedure. Results: The surface roughness values differed between specimens that underwent the glazing and the polishing process at high sintering temperatures. The glazed samples (1.154 μm) had higher surface roughness values than the polished samples (0.808 μm) at 1650°C. Conclusion: The polishing process is recommended instead of glazing as a finishing procedure for zirconia materials.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
CodeCraft的应助被asdasdasd采纳,获得10
刚刚
Maestro_S的应助被SanXing三醒采纳,获得10
1秒前
潮哦你发布了新的文献求助10
1秒前
大模型的应助被moriaty采纳,获得20
1秒前
1秒前
2秒前
今后的应助被王小乙采纳,获得10
3秒前
赘婿的应助被王耀田采纳,获得10
4秒前
5秒前
彭于晏的应助被Taviana采纳,获得10
6秒前
6秒前
7秒前
科研通AI6.3的应助被绮娜采纳,获得10
8秒前
Ssssssinan发布了新的文献求助10
8秒前
倩倩倩完成签到 ,获得积分10
8秒前
123564举报sxy的求助涉嫌违规
8秒前
11秒前
Pan完成签到,获得积分10
11秒前
12秒前
12秒前
小状元发布了新的文献求助10
12秒前
3417294224完成签到 ,获得积分10
13秒前
Chunsong发布了新的文献求助10
14秒前
小小y完成签到,获得积分10
14秒前
CTx发布了新的文献求助10
14秒前
nini发布了新的文献求助10
16秒前
科研通AI2S的应助被科研通管家采纳,获得10
16秒前
往鉳完成签到 ,获得积分10
16秒前
null的应助被科研通管家采纳,获得10
16秒前
16秒前
17秒前
17秒前
Jasper的应助被科研通管家采纳,获得20
17秒前
传奇3的应助被科研通管家采纳,获得10
17秒前
彭于晏的应助被科研通管家采纳,获得10
17秒前
今后的应助被科研通管家采纳,获得10
17秒前
传奇3的应助被科研通管家采纳,获得10
17秒前
李爱国的应助被科研通管家采纳,获得10
17秒前
无极微光的应助被科研通管家采纳,获得20
18秒前
喝可乐也很好完成签到,获得积分10
18秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8183381
求助须知:如何正确求助?哪些是违规求助? 9572627
关于积分的说明 21826833
捐赠科研通 7780405
什么是DOI,文献DOI怎么找? 3433993
关于科研通互助平台的介绍 2558177
邀请新用户注册赠送积分活动 2480309