Cu-Cu joint formation by sintering of self-reducible Cu nanoparticle paste assisted by MOD under air condition
作者
Yulei Yuan,Xun Liu,Junjie Li,Pengli Zhu,Rong Sun
出处
期刊: [Institute of Electrical and Electronics Engineers] 日期:2021-09-14卷期号:: 1-4
标识
DOI:10.1109/icept52650.2021.9568046
摘要
As the electronics industry develops, semiconductor devices increasingly tend to be used in high temperature application. Higher working temperature also puts forward new requirement for die-attach materials, copper nanoparticles (Cu NPs) have shown great promise as a die-attach material due to its excellent thermal and electrical conductivities. However, Cu NPs are easily oxidized. In this article, we introduce a self-reducible Cu NPs paste compose of Cu-based MOD, reducing solvent and commercial Cu NPs (100 nm), and the sintered joints can achieve high shear strength in air. The copper produced by the decomposition of self-reducible MOD helps sintering between copper nanoparticles and has a certain effect of inhibiting oxidation. The influence of MOD content on shear strength and sintered layer structure was explored. Finally, reliable Cu-Cu joints with a shear strength of 20.47 MPa was achieved with 250°C bonding for 15 min in air. This novel Cu NPs paste is promised to be used as a bonding material for electronic packaging and provides a new method for copper sintering in air.