材料科学
腐蚀
表面粗糙度
点蚀
表面光洁度
氧化物
冶金
介电谱
电化学噪声
电极
扩散
复合材料
电化学
化学
物理化学
物理
热力学
出处
期刊:Failure Analysis and Prevention
日期:2012-01-01
被引量:1
摘要
In 3% NaCl solution,the early stages of pitting corrosion of 304 stainless steel ground with different aluminum oxide water proof papers were studied by dynamic potential scanning,electrochemical impedance spectrum(EIS) method and electrochemical noise(EN) method.The results indicate that,with the decrease of surface roughness,the corrosion potential and pitting corrosion potential rose,the charge transfer resistance and the noise resistanc also rose obviously.The standard deviation of potential,as well as the standard deviation of current,decreased as the surface roughness decreased.A diffusion tail inclining along the angle of 45° to the x-axis was observed when the electrode with 0.25 μm roughness was tested,indicating diffusion began at the surface.The results suggest that metastable pits initiate and grow up more difficultly at smooth surface than at rough surface.
科研通智能强力驱动
Strongly Powered by AbleSci AI