吸附
硫化物
X射线光电子能谱
化学吸附
解吸
单层
化学
朗缪尔吸附模型
化学工程
硫化氢
废水
Zeta电位
材料科学
无机化学
核化学
硫黄
有机化学
纳米技术
纳米颗粒
工程类
废物管理
作者
Shuai Wang,Hao Wang,Shixing Wang,Libo Zhang
标识
DOI:10.1016/j.molliq.2022.120584
摘要
Enrichment of gold (Au) from wastewater is an efficient use of non-renewable resources and can reduce environmental pollution. Here, A new adsorbent (UiO-66-ES) is created that efficiently captures Au(III) in simulated wastewater by altering UiO-66-NH2 with poly(ethylene sulfide). The adsorbent was successfully prepared as confirmed by FT-IR, SEM, EDS, BET, XRD and XPS. At 318 K and a pH of 4.0, the highest removal ability of UiO-66-ES for gold ions is 723.005 mg/g. Kinetic studies revealed that Au(III) chemisorption on UiO-66-ES was the main driving force in the process. The recovery of Au(III) by UiO-66-ES happened as a monolayer adsorption over a uniform surface, according to the isotherm investigation. Meanwhile, thermodynamic analyses revealed that the adsorption is a heat-absorbing and natural phenomenon. Moreover, after four adsorption–desorption cycles, UiO-66-ES still achieved 89.83% adsorption and 86.43% desorption. In simulated wastewater comprising seven metallic ions, the adsorbent is extremely specific for Au(III). The adsorption mechanism of Au(III) includes electrostatic attraction, chelation, and reduction, according to zeta and XPS data. Since its high adsorption capacity, great selectivity, and good repeatability, UiO-66-ES is projected to be used in the practice of gold (Au) recovery from wastewater.
科研通智能强力驱动
Strongly Powered by AbleSci AI