材料科学
微观结构
极限抗拉强度
烧结
复合材料
金属注射成型
造型(装饰)
延伸率
压缩成型
钛
碳纤维
相对密度
冶金
模具
复合数
作者
Weichen Zhang,Lü Li,Peng Cao,Gang Chen,Muhammad Dilawer Hayat
标识
DOI:10.1080/01694243.2024.2320502
摘要
A water-soluble binder was used to obtain TA1 sintered samples prepared by injection molding. The effects of the sintering temperature on the microstructures and mechanical properties of the sintered samples were analyzed. A relative density of >91% is achieved. Some residual carbon and oxygen remain in the sintered samples, affecting the mechanical properties. The tensile strength and elongation of the sample sintered at 1,300 °C are the highest: 592 MPa and 12.95%, respectively. Detailed electron microscopic analysis was performed to identify the morphology and nature of the resultant titanium carbides and oxides.
科研通智能强力驱动
Strongly Powered by AbleSci AI