无定形固体
退火(玻璃)
电阻式触摸屏
材料科学
图层(电子)
无定形二氧化硅
牺牲
化学工程
矿物学
纳米技术
复合材料
光电子学
结晶学
化学
计算机科学
计算机视觉
历史
考古
工程类
作者
Taiki Takashima,Tien Yang Lo,Hitoshi Takane,Shunsuke Murai,Katsuhisa Tanaka
标识
DOI:10.35848/1347-4065/adb164
摘要
Abstract Metasurface stickers, where the periodic array of nanoparticles is embedded in an elastomer film, can be attached to and detached from the surface of target materials and work as metasurface to control light. The stickers can be fabricated by lithographic and etching/lift-off processes, followed by a transfer process. To transfer, a sacrifice layer, typically water-soluble and oil-insoluble organic polymers, is required to separate the substrate from the metasurface. Although they fulfill the prerequisite as a sacrifice layer, organic polymers cannot be heated above 300 °C, and are often damaged during exposure to reactive gases in the dry etching processes. In this study, we introduced an alternative amorphous germanium dioxide (GeO2), an inorganic material with high water solubility, as the transfer sacrificial layer. The amorphous GeO2, made by mist chemical vapor deposition in this study, is stable and maintains the amorphous state under heat treatment up to 750 °C. Upon exposure to water, amorphous GeO2 is readily nano-crystallized and dissolved while it is unsolved in organic solvents used in the nanofabrication processes. Using this sacrificial layer, we fabricated a TiO2 metasurface sticker via nanoimprinting of a Ti film followed by thermal oxidation. We demonstrate a photoluminescence outcoupling by placing a sticker on the phosphor plate: the emission pattern is modulated both spatially and spectrally in a way defined by the structure of the metasurface sticker.
科研通智能强力驱动
Strongly Powered by AbleSci AI