晶闸管
电感
电气工程
工程类
断路器
绝缘栅双极晶体管
门驱动器
电子工程
电压
作者
Weibin Zhuang,Yifei Wu,Yi Wu,Mingzhe Rong,Xin Wu,Jiun-Chang Zeng,Chuangchuang Tao
出处
期刊:IEEE Transactions on Industrial Electronics
[Institute of Electrical and Electronics Engineers]
日期:2024-06-01
卷期号:71 (6): 6427-6437
被引量:1
标识
DOI:10.1109/tie.2023.3294581
摘要
Most medium-voltage and high-voltage hybrid circuit breaker solutions usually adopt several expensive insulated gate bipolar transistors connected in parallel to achieve large current breaking, which is difficult to meet economic needs. Thus, this article presents an integrated multichips package module with a novel design. The press-pack housing design reduces 50% stray inductance compared with the discrete device scheme. It uses an oscillating circuit to achieve large current breaking. A 4-inch press-pack housing prototype consisting of the diode, thyristor, and gate-commutated thyristor chips is developed. The FEM analysis shows its internal inductance is below 30 nH, and its maximum temperature is around 86 °C under 2 kA condition. Next, the parameter design of the proposed module with 30 kA breaking capability is presented for demonstration. Moreover, experiments on the designed module are conducted to verify its feasibility. Finally, the cost analysis shows the proposed module has a lower cost, achieving a 58.3% cost reduction than the traditional commutation branch scheme.
科研通智能强力驱动
Strongly Powered by AbleSci AI