The development of an automated assessment system for resistance training movement

Portable data collection devices and machine learning (ML) have been combined in autonomous movement analysis models for resistance training (RT) movements. However, input features for these models were mostly extracted empirically and subsequent models demonstrated limited interpretability and generalisability to real-world settings. This study aimed to investigate the utility of interpretable and generalisable modelling techniques and several data-driven feature extraction (FE) methods. This was achieved by developing machine learning movement analysis models for the barbell back squat and deadlift using markerless motion capture. 61 participants performed submaximal and maximal repetitions of both RT movements. Movement data was collected using two Azure Kinect cameras. Joint and segment kinematic variables were calculated from the collected depth imaging, and input features were extracted using traditional, manual FE methods and novel data-driven techniques. Classifiers were developed for several predefined technical deviations for both movements. Many of the addressed technical deviations could be classified with good levels of accuracy (≥70%) while the remainder were poor (55%–60%). Additionally, data-driven FE techniques were comparable to previous, traditional FE methods. Interpretable and generalisable modelling techniques can be utilised to good effect for certain classification tasks while data-driven FE techniques did not provide a consistent advantage over traditional FE methods.