材料科学
阴极
电解质
锂(药物)
电化学
化学工程
氧化物
相间
原位
杂质
电极
表面改性
电压
储能
纳米技术
镍
表面工程
高压
纳米颗粒
高能
纳米线
砷
碳纤维
过渡金属
铝
残余物
降级(电信)
作者
Leiying Zeng,Qing Tang,Ying Yang,Xueyi Guo,Long Jiang,Hui Tong,Jilu Zhao,Hui Shao,Yanbin Shen,Gaoqiang Mao
出处
期刊:Energy & Fuels
[American Chemical Society]
日期:2025-09-24
卷期号:39 (39): 19033-19041
标识
DOI:10.1021/acs.energyfuels.5c04268
摘要
High-nickel layered cathode materials (LiNixMnyCozO2, x + y + z = 1, x ≥ 0.8) have garnered significant attention for next-generation lithium-ion batteries due to their outstanding energy density. However, increasing the nickel content leads to deteriorated air stability and poor cycling performance at high cutoff voltages, primarily due to interfacial chemical instability and electrochemical degradation. Herein, we report a facile and effective surface modification strategy for LiNi0.83Co0.12Mn0.05O2 (NCM811), leveraging surface residual alkaline lithium compounds as a lithium source to enable in situ transformation and the concurrent formation of a LiF-rich protective layer. The modified material, referred to as PT-NCM811, exhibits markedly reduced surface impurities after 7 days of air exposure, demonstrating excellent air stability. Furthermore, in a baseline ester-based electrolyte without any additives, PT-NCM811 delivers a capacity retention of 79.2% after 200 cycles at 0.5 C under a high cutoff voltage of 4.4 V vs Li+/Li, substantially outperforming the pristine NCM811 counterpart. This work offers a promising avenue for interfacial engineering of high-nickel cathodes and paves the way toward their practical deployment in high-energy-density lithium-ion batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI