材料科学
同质性(统计学)
蛋白质丝
折射率
光学玻璃
激光器
苏打石灰玻璃
平板玻璃
光学
复合材料
气泡
光电子学
计算机科学
物理
机器学习
并行计算
作者
Junjie Luo,Luke J. Gilbert,Chuang Qu,Robert G. Landers,Douglas A. Bristow,Edward C. Kinzel
出处
期刊:Journal of Manufacturing Science and Engineering-transactions of The Asme
[ASM International]
日期:2016-11-08
卷期号:139 (6)
被引量:80
摘要
There are many scientific and engineering applications of transparent glass including optics, communications, electronics, and hermetic seals. However, there has been minimal research toward the additive manufacturing (AM) of transparent glass parts. This paper describes and demonstrates a filament-fed technique for AM of transparent glass. A transparent glass filament is melted by a CO2 laser and solidifies as the workpiece is translated relative to the stationary laser beam. To prevent thermal shock, the workpiece rests on a heated build platform. In order to obtain optically transparent parts, several challenges must be overcome, notably producing index homogeneity and avoiding bubble formation. The effects of key process parameters on the morphology and transparency of the printed glass are explored experimentally. These results are compared to a low-order model relating the process parameters to the temperature of the molten region, which is critical to the quality of the deposited glass. At lower temperatures, the glass is not fully melted, resulting in index variations in the final part, while at higher temperatures, phase separation introduces bubbles and other defects into the part. The correct process avoids these issues and deposits optically transparent glass.
科研通智能强力驱动
Strongly Powered by AbleSci AI