New insights into smectite illitization: A zoned K-bentonite revisited

The illitization reaction in a thick K-bentonite bed located in upper Cretaceous marine shale in the Montana disturbed belt was studied by X-ray diffraction, chemical analysis, and thermal gravimetric analysis. Modeling of the experimental XRD patterns from oriented clay specimens in air-dried and glycolated states shows that at each sample location in the bentonite bed a mixture of R0 illite-smectite (I-S) and R1 I-S coexist. Each of these phases in all samples consists of the same or similar content of illite and expandable layers independent on location in the bed. In particular, the illite content in the R0 I-S and the R1 I-S from the <0.5 μm fractions is equal to 30 and 62%, respectively. The main difference between the samples at different locations is the different weight concentrations of the coexisting I-S phases. The R1 I-S content decreases progressively from the lower and upper contacts of the bed to its center. The reverse trend was observed for the R0 I-S. The layer unit-cell parameter b increases from samples located near the middle of the bed toward samples near the bed margins. The DTG patterns of the samples contain two endothermic maxima at about 640 and 470 °C, corresponding to cis-vacant (cv) illite and trans-vacant (tv) smectite layers coexisting in the R1 I-S and R0 I-S.