A Multi-One Instruction Set Computer for Microcontroller Applications

This work presents a simple integer-only instruction set architecture and microarchitecture derived from One Instruction Set Computers (OISCs) and embedding multiple execution modes ( mOISC), capable of running at a reasonable performance level to enable basic usability in microcontroller applications. The purpose of mOISC is to enable simple data transfer tasks and run small programs while maintaining ultimate simplicity. We present the internal organization for a computer architecture including an 8bit I/O register, and 64kB central Random Access Memory (RAM), organized in two-bytes words. The processor can run code generated assuming an OISC or a Complex Instruction Set Computer (CISC) scheme (op-code based), depending on the programmer's demands and based on the initial setting of a register during start-up. To enable practical applications and demonstrate successful exploitation of mOISC in view of integration in a compiler back-end, we designed a custom Proof-of-Concept (PoC) software design toolchain based on LLVM and clang. Although not targeting all the features of commercial ISA, the toolchain is capable of compiling C code from LLVM intermediate representation or generating mOISC code translated from ARM, x86, RISC-V, and MIPS assembly. The toolchain also enables practical Value Change Dump (VCD) simulations output with graphical plots of the CPU state and associated symbols. A PoC microcontroller system has been synthesized in a low power Field Programmable Gate Array (FPGA) and verified in a basic wireless telemetry application including a Synchronous Peripheral Interface (SPI) RFM9x Long RAnge (LoRA) transceiver and a MAX30205 Inter Integrated Circuit (I2C) temperature sensor, using its 8bit I/O port, with software bus interface implementation. mOISC occupies ~6% of resources on a Cyclone 10LP FPGA, for 1397 Adaptive Look-Up Tables (ALUTs) and 461 dedicated logic registers. The measured dynamic current consumption of the complete FPGA board with synthesized mOISC is 12mA at 100MHz clock.