燃烧室
扩散器(光学)
偏转(物理)
材料科学
机械
混合动力系统
燃烧
燃烧室
机械工程
工程类
光学
计算机科学
物理
有机化学
化学
机器学习
光源
作者
A. Duncan Walker,Paul A. Denman
摘要
Modern, low-emission, radially staged combustors present the diffuser with a flametube of increasing radial depth. However, conventional diffuser systems limit the amount of flow diffusion and deflection that can be achieved in a given length, and, therefore, unconventional configurations such as hybrid or bled diffusers must be considered. This paper reports on the design and development of a hybrid diffuser for use with a radially staged combustor and compares its performance with that of a conventional bifurcated diffuser system. A simplified computational model was employed in conjunction with a fully annular isothermal test facility incorporating engine representative outlet guide vane wakes and a radially staged combustor. The hybrid diffuser was shown to operate well in excess of conventional design limits, and good agreement was seen between predicted and measured velocity profiles at diffuser exit. Moreover, the increase in area ratio offered by the hybrid system was realized without deterioration in the diffuser effectiveness, and, as a result, a 25% reduction in the total pressure loss to the combustor feed annuli was achieved.
科研通智能强力驱动
Strongly Powered by AbleSci AI